So, now if you are willing to run Marshmallow on LG G Pad 7 lte V410 follow our guide to Flash CM 13 on it.

Warning!

This ROM is only for LG G Pad 7.0 LTE V410, Do Not try this tutorial on any other devices or else you will brick your device. Also, if something during the installation process goes wrong, nor us (droidopinions) neither company will take responsibility, so do it on your own risk. However, if you will follow our instructions carefully there is less chance of damage or bricking.

Prerequisites

Download these files

CM13 nightly LG G Pad V410 | link Google Gapps Marshmallow | link

Install CM13 Marshmallow on LG G PAD 7 LTE V410, Steps

  1.  Download the CM13 zip and Gapps file then connect your device with PC  using data cable .
  2.  Transfer the files to the SD card of your device  then unplug it and turn it off .
  3.  Now boot into recovery mode by pressing and holding  volume down button  plus power button, release them when LG logo appears and then again press power button and volume up button together .
  4.  In recovery menu it is recommended to backup your current ROM by performing Nandroid backup .
  5.  Now wipe all system data, in CWM  tap wipe data/factory reset option  and in TWRP  recovery tap Wipe, select system data, cache, Dalvik Cache  and swipe to wipe. In CWM also clear cache partition and Dalvik cache in advanced option.
  6. Now to install ROM file in CWM Tap install zip followed by choose zip from sdcard then locate and select CM13 zip file for flashing. In TWRP, tap install, navigate to The ROM file and swipe to Flash it.
  7. This will take a while, when flashed again do the same process and Flash GApps zip file.
  8. Wait for the completion and then go back and reboot your device. Your device will reboot in normal mode and it may take few minutes, so be patient and Congrats! Your LG G Pad V410 will be running Marshmallow now. That is it. Hope you like CM13 Marshmallow on LG G PAD 7 LTE V410. If you have any problems then comment below. Please share it and subscribe.